HRP, Streptavidin (Cat. No. A21000): Dilution Range, Formulation, and Storage Compared

Biotin-based detection rests on an enzyme conjugate. When signal drops or background creeps up, the detection step is usually the first thing researchers revisit.
HRP, Streptavidin (Cat. No. A21000) is a streptavidin–horseradish peroxidase conjugate listed by Abbkine for ELISA (enzyme-linked immunosorbent assay), IHC-P, and WB (western blot). The product page says the conjugate combines with biotins or other derivatives from biotin. It arrives as a liquid solution with suggested starting dilutions for all three readouts, a defined buffer, and stated storage conditions. The comparison below puts those facts side by side with typical practice.
Three Readouts, One Biotin-Binding Conjugate
The listed applications are ELISA, IHC-P, and WB.
Those three formats cover plate-based detection, paraffin tissue staining, and immunoblotting. The page describes the conjugate as combining with biotins or other derivatives from biotin, which is the basis for its use in biotin-dependent workflows. Abbkine's background note also describes enzyme-, biotin-, and fluorophore-conjugated secondary antibodies for Western Blot, ImmunoHistoChemistry, ImmunoFluorescence, Flow Cytometry, and ELISA.
Starting Dilutions for WB, IHC-P, and ELISA
Suggested starting dilutions: WB 1:10000–1:100000, IHC-P 1:500–1:2000, ELISA 1:5000–1:100000.
These are starting points rather than fixed values. The applications note states that optimal working dilutions should be determined experimentally by the investigator. The WB and ELISA ranges give a wide window for titration; the IHC-P range is narrower, so pilot staining on control sections is a practical first step.
A Defined Liquid Formulation With Storage Rules
The conjugate is supplied as a liquid solution in PBS, pH 7.4.
The storage buffer is described as liquid in PBS, pH 7.4, containing 1% BSA as stabilizer and 50% Glycerol. Abbkine states the product is stable for one year at -20°C from the date of shipment. For maximum recovery, centrifuge the original vial after thawing and before removing the cap. Aliquot to avoid repeated freezing and thawing. Shipping is with a gel pack and blue ice.
| Feature | This Product | Conventional / typical approach |
|---|---|---|
| Conjugate | HRP, Streptavidin; combines with biotins or other derivatives from biotin | depends on the detection system |
| Listed applications | ELISA, IHC-P, WB | varies by assay format |
| Suggested starting dilution, WB | 1:10000–1:100000 | commonly optimized by the investigator |
| Suggested starting dilution, IHC-P | 1:500–1:2000 | commonly optimized by the investigator |
| Suggested starting dilution, ELISA | 1:5000–1:100000 | commonly optimized by the investigator |
| Storage buffer | Liquid in PBS, pH 7.4, containing 1% BSA as stabilizer and 50% Glycerol | varies by formulation |
| Stability | Stable for one year at -20°C from date of shipment | varies by storage condition |
Start from the listed dilutions, then adjust experimentally for your own samples. See the HRP, Streptavidin (Cat. No. A21000) product page for ordering details: https://www.abbkine.com/product/hrp-streptavidin-a21000/
Reference: https://www.abbkine.com/product/hrp-streptavidin-a21000/
For research use only. Not for diagnostic or therapeutic use.